Product Reviews Vape Mod Reviews

“HΩ” Hohm Wrecker Mod Review

One of the latest and most interesting mods to hit the vaping market – the “HΩ” Hohm Wrecker Mod.  Feel free to enjoy this Hohm Wrecker Mod Review in both written and video format.  The Hohm Wrecker has been designed and manufactured in California by Hohm Tech, and sold at Vapor Cube.

Appearance

The Hohm Wrecker’ss packaging that it comes in looks superb.  The box it comes is unique, nothing like anything I’ve seen a device come in.  The box stands just taller than the device itself and slightly wider as well.  The box is a matte black with gloss male and female symbols throughout the background.  The front of the box says “HΩ Wrecker” in an appealing font.  The back has “HΩ” displayed once again.  Below that is the URL to Hohm Tech, followed by a slew of certifications and then the wording “Designed in California” and “Assembled in China” (Mod was manufactured in the United States, Chip was made in China).  Opening the box you immediately see the device full frontal, while a warranty card, an instructional manual and an information card rests behind it.

hohm wrecker box

The Hohm Wrecker Mod itself looks great, especially with its mild orange color.  Around the parameter of the device, there are male and female symbols that have been etched into its body.  The front of the device says “HΩ Wrecker” in the same font, the back is a battery compartment door that has nothing on it.  One side of the device is blank, while the other side sports a rectangle button with rounded edges, then a large concave round button, the OLED screen, and towards the bottom of the device sit the plus and minus buttons.

hohm wrecker mod body

 

Note:  There is a new “Limited Edition” version of the Hohm Wrecker that is now available.  You can see that version here.

Features

With the Hohm Wrecker, the features are almost endless.  This device is feature packed, so I’ll tell you about the basics, then list other additional features.

Starting off, the HohmTech Hohm Wrecker Mod has a full CNC casing made of Aluminum, it has a spring-loaded 510 connection, accepts two 18650 batteries, the shield over the electronics in the battery compartment is also made of Aluminum, and it utilizes the FSK (Flagship Killer) Chip, which has can fire up to 151 watts and able to supports resistances as low as 0.05Ω.  Additionally, the Hohm Wrecker also has temperature control with a temperature range of 200F to 700F and can also fire up to 151 watts.  This device also has a Insane Temps feature, which fires the device instantly to 151W until it reaches your set temperature – basically it has a pre-heat function much like the DNA40/200 chip.

insane temps mode

The OLED screen on this bad boy is bright, well set-up and very easy to read.  The back of the device has a battery door that has strong magnets, so replacing the batteries is quick and easy.  The bottom of the device has many ventilation holes, which is good to know since many devices that are being manufactured today overlook proper ventilation.  Being that this device is made of Aluminum, it’s very light, even with both 18650’s inside.  Being that the device doesn’t have too much weight to it, it feels good in the hand, but at the same time, it also feels like it’s not so durable – even though I know it is.

hohm wrecker battery compartment

If I were to complain about anything with this device, it has to be that it says “Clock of Insanity” every time you press the fire button to vape in wattage mode.  Now, I have no idea why it does this, and even though it’s something unique, it borderlines cool and gimmicky.  When I press my fire button, I want to see exactly what my mod is doing, even if there is no change in what it displays.  It may be that I’m just so used to pressing my fire button to check watts or ohms, but either way, it’s something that is annoying if the feature is only for looks and not actually doing something.  However, there is something that makes up for that, that I really like – using this device, switching from temperature mode to wattage mode and adjusting the temperature or watts is very easy.  That’s a huge plus in my book for being user-friendly.

clock of insanity

Additional Features

  • Integrated proprietary Intellichips that execute a multitude of tasks

+  Supports variable output banding on wattage & voltage adjustments so chip does not fluctuate in wide variations

*Result: increased battery life, coil builds, and reduces battery stress

*Result: diminishes power spiking & demand on batteries

+  Runs a self-diagnostic & component initialization during power up

*Result: verifies it is ready for safe operation

+  Executes patent pending TruDegreeTM technology (while using Ni200 wire)

*Result: displays real-world coil temperatures

  • Double poled circuitry like a multi meter

+  Enables precise ohm metering

  • Battery contact footprint 25% larger than traditional 150W+ devices average

+   Candidates of measure: Sigelei 150W non TC, Snow Wolf 200W, IPV3-Li 165W, Tesla Metal 160W TC

+  Eliminates battery contact stress, battery power spiking, & heat

  • Insane Temps feature in Temp Mode

+  Initiates 151W momentarily then switches over to selected watt to establish near instant temp

  • Sunk tripoint nickel-plated neodymium iron boron magnets

+   Prevent corrosion and/or oxidation to magnets

  • Top to bottom, inside & out, 100% engineered in America
  • System menu & instruction manual written by English vapers, in English
  • Aesthetic design exclusive to represent the unity of all vapers
  • Concaved FIRE button for finger ergonomics
  • 0.05Ω – 3Ω to the full & true 151W (0.01Ω update coming: ETA 4th qtr ‘15)
  • Full-face push pin with high-tension spring

+ ensures safe & pure contact for the energy flow

*Result: eliminates another energy stress point

  •  FSK chip IC & Intellichips built to handle 200W

+  151W because we are not in a watts war, we’re in an efficiency and ‘doing it right’ world

Additional Specs

  • With FSK chip technology, runs on (2) 25A+ 18650 batteries
  •  Size: 4.13 x 2.28 x 0.94 in. (105 x 58 x 24 mm)
  • Thread Style: 510 connection with full-face push pin & high-tensile spring
  • Wattage Output: 10W – 151W (also in TC)
  • Voltage Output: FSK Intellichips automation
  • Temperature Range: 200 oF – 700 oF (93 oC – 372 oC)
  • Ohm Resistance Range: 0.05Ω – 3Ω
  • Temp/Watt Increments:  .1-1 watts (WATTS MODE) : 10 oF (TEMP MODE) : 1 oC (TEMP MODE)

Performance

The Hohm Wrecker, as you would expect, performs great in both wattage and temperature control modes.  Even though I prefer not to use box mods that have a hard squared shape, this device has become my go-to mod when using all of my RDA’s.  The truth is, the power is there when you need it, it hits hard and instantly.  While in temperature control, it does exactly as it is supposed to and gives off a consistent vape.  When it comes to performance, the Hohm Wrecker is a beast, so I definitely have no complaints in this category at all.

hohm wrecker vapor production

About the author

Blake Brown

Blake is the owner and creator of the Guide To Vaping blog. He has expressed his passion for the vaping industry through his deeply rooted and highly informative content. Being a writer and content provider for the vaping industry for year's, Blake has also gained experience from working with multiple blogs and well respected companies.

5 Comments

Click here to post a comment

Leave a Reply

  • Great in-depth review. Just got one on a Black Friday deal for $76. It’s in route and I can’t wait to get my hands on it. By the way, great job on a clean site. It’s easy to navigate through and isn’t cluttered. Everything is where it should be.
    Follow me on Instagram @modstersquad

  • I wouldn’t buy anything from them mine didn’t even work for 48 hours and they wouldn’t let the store I bought it from do anything about it they said I would have to send back to them. I paid 150 for it then I would have to pay a $8 fee to prove I was over age of 18 and shipping both ways that would be at least 15 bucks to send it and insure it. They wouldn’t do anything to help cover shipping on an item we had for less then 48 hours. I would never buy there products again. Very unhappy customer.

  • How do I charge it using the USB port inside next to the batteries? I plug it in and it lights up like its charging and then nothing…and if I leave the batteries in it doesn’t even light up when I plug in the charger

Atom Vapes
VaporFi
Seduce Juice
Highbrow Vapor
Smoque

Newsletter

Subscribe to the Guide To Vaping Newsletter for the latest vaping news, reviews, and information. Be the first to receive our exclusive deals and giveaways!

VaporFi New Year Sale

VaporFi New Year Sale