Wismec Reuleaux RX23 Mod
Advanced

A Complete Guide To The Reuleaux RX2/3

Love them or hate them, the Reuleaux family of mods are some of the most recognizable on the market.  It seems that every time you turn around, you see someone holding the RX200, RX200S or even the RX75, but recently Wismec released a game changer with a 2/3 battery design.  Taking full advantage of any of the Wismec systems can take a little getting used to, figuring out the controls can be trying especially if you’re brand new to an adjustable vaping device, but today we’re going to walk you through the functionality of the RX2/3 and make it so that you can buy one today and use it straight out of the box.  While the box mod itself may not be ideal for a complete beginner, we’re going to make this device as un-intimidating as possible.

We typically share plenty of information about products, such as the best vape mod of 2016 where we name the RX2/3 as the best currently on the market, while we also share the 5 best menthol vape juice flavors for the perfect menthol vape to combine with your setup.  Once you finish this article, please feel free to navigate throughout the site as we have nearly 2,000 posts dedicated to providing you with vaping information, just like this post that you’re currently viewing.  Thanks for visiting Guide To Vaping and we hope you enjoy!

If you have the time, we highly recommend that you check out Vape Preview, a website geared towards sharing information on the newest vape products as soon as they’re announced by the manufacturers.  While you’re there, check out memes section for a laugh or the list section to give your online friends a good read.

ATTENTION: You’ve found a great vape mod for yourself, now it’s time to find a nice vape pen for your partner, family member or friend.  It’s all about getting as many people off those stinkies as possible, and we believe these modern devices can do that.  Feel free to check out our top 5 best vape pen starter kits article, where we explain what a vape pen is, we tell about the history of them, and we list the best vape pen starter kits with detailed information.

CHECK OUT THE REULEAUX RX2/3

The Basics of The RX2/3

The concept behind this mod is mind-blowing.  There are 3 batteries for 200 watts of pure unadulterated power, looking and operating in much the same way as the RX200S or instantly switching to 160 watts by simply removing one of the battery bays and changing out the back cover.

Guide To The RX2/3 Mod With Battery Cover Open

The smaller frame size makes for a more mobile mod, and less bulk makes for greater portability at the expense of a bit of wattage and less battery life.  We already put together an overview of the mod itself, a preview post when it was first released and anyone who knows the GuideToVaping crew knows we love the RX200 and 200S.   We know them well and the new addition is well received as occasionally the mass of those devices is too much to be carrying around all day.

CHECK OUT THE REULEAUX RX2/3

About the author

Daniel Hall

Avid Vaper, advocate and cloud chaser. Writer for 3 vaping websites and broadcaster/presenter as Vapin Demon on Coast 2 Coast Vapers.
Originally from Manchester, England, I got bored one day and moved to the USA.
Vaping saved my life and my aim is to save as many others as I can.

85 Comments

Click here to post a comment

Leave a Reply

      • If you are vaping on a Reuleaux 2/3 yes you can. hold the down and up buttons down at the same time for 3-4 seconds and on your screen you should see key lock. To unlock do the same thing and on your screen you should see key unlock. to turn your logo off just press and hold the fire button and the up button at the same time for 4-5 seconds. If you need any more info email me at schellconstructionCS@gmai.com

        • Dude I owe you my life lol. I was searching online for half an hour because my stupid ass locked my screen and I just quit smoking like two days ago lol.

    • Don’t know why so many are complaining about the rx2/3. I have tons of mods and its one of my favorites. Never had any issues. And then it takes custom firmware and icons to make it even better. Most of those complaining just sound like you have no idea what you’re doing. I have 2 Sigelei, 2 Kanter boxes, smok ultra x cube ultra (my current favorite), alien, and a few others and the rx2/3 is my 2nd favorite right after the x cube ultra. I have a few tanks and tons of RDAs, RDAS, etc and no issues. Watch a YouTube video or somethin people.

      • How in the hell do I get this shit to work rite. Exp. I can use the alien mod with baby beast tank and rip it like no other no problems. I have my rx 2/3 on vw mode with the baby beast no matter what setting I have it in or juice that’s in it I’m getting a rough hit that makes me cough hella hard an almost die what is the issue

  • “Wattage mode is great for working with Kanthal or NiChrome coils”
    Wattage mode is only for Kanthal and SATAINLESS STEEL. NiChrome can not be ran in wattage mode only temp control.

    • No, not correct. You can run both stainless steel and NiChrome without temperature control. In fact, before temperature control was around, people were running NiChrome in regular wattage mode for the simple fact of its immediate ramp up time and low resistance.

  • So I am not sure what I am doing wrong, but I cannot get my rx2/3 to stay on temp control when I select the M1. I am using Kanthal, but the mod should stay where I set it; or am I wrong about that.

      • Only 2 mods currently exist on the market for TC with Kanthal and the results are a bit dodgy. In the case of the Hohmwrecker G2 which I own, I can confirm that Kanthal TC works but isn’t as sensitive as other metals. It’s definitely possible to lightly burn the cotton before the mod reads a significant enough change in the coil to react. To my knowledge, TC with Kanthal cannot be accomplished by reading changes in resistance (it changes waaaay too little) but instead has to rely on other factors such as thermal expansion. How does it read that? Beats me.

    • hey just bought the vape ripped it five times walked away came back went to rip it and now it keeps telling me atomizer low or no atomizer. It wont read ammperage or ohms either, i cleaned all the connections and even updated the firmware but nothing happend anyone know whats up with this thing, oh and i tried multiple sets of coils

      • On the bottom of your tank there is a copper \ metal price that you should be able to screw out a bit to make the connection reach the mod j had this problem with one of my rda’s fixed it maybe try that.

  • I upgraded the firmware last night, and the battery level indicator has reverted back to a battery level ‘bar’. I previously had the battery level display set to read the percentage, and now I can’t seem to get it back! I feel I’ve tried all the button combinations. I’m wondering if the new firmware has removed the option. Can you help?

    • Hit the fire button 3 times. Then, press the left button 5 times. This will bring you to the battery section. Press the right button. This will change the battery indicator to the percentage display. Also, notice that you can change other items on the display. Personally, I have no need for the puff indicator. That display can be set to show amperage being applied to your coils, as you fire it. Granted, it is a pain to look down at the display whilst vaping, but, again, I hate the puff indicator. lol

    • I have the baby beast the cleito and the uwell crown I love ❤️ all 3 the beast had the best flavor.! Also what is the little
      A in the left corner or the releaux and what’s that adjustment for ?

      • The new Clieto 120, imho, is one of the best flavor tanks on the market. It also produces massive clouds. I also use my trusty Velocity RDA. I don’t think I’ll ever get tired of that amazing device. The last atty that goes in rotation with my RX 2/3 is the Smok TVF4. I use the TF-R3 RBA deck in it. The build on the RBA is 3 stainless steel, fused Clapton coils. This tank probably drinks more fluid than any other atty I own. The same can be said for my first two choices, but they’re not quite as ‘thirsty.’

      • hello Are u using original coils or Rba with Uwell?
        if u use Rba wich wire are u using?
        Because i had issue with SS 316 0.5 with Dry hit
        let me know please

  • I keep trying to upgrade the firmware but the software never recognizes the mod. I have tried it numerous ways. Any tips or tricks? I checked and it is currently running 4.02.

  • I put some Clapton coils in that read like .96 its 26/32 ga Kanthal 3mmID 14 wraps in my Kennedy 25 2 post and it only let’s me fire up to like 87 watts. Is that normal? Is it too high a build? I wanna get some wire I can do temp control with soon.

  • Hi, thanks for the guide. I am using smok baby beast coils and I’m not able to choose the mode TC SS. it always go back to variable wattage. Do you know why?

    • I assume that it recognizes that the coil you’re using isn’t using stainless steel wire. You only use the SS temperature control mode when the coil that you’re using is an actual stainless steel coil. I believe the coil you’re using is Kanthal wire, meaning it would need to be used in Wattage mode.

  • can someone please tell me how I can change the voltage . it was 5.53v but now its changed to 3.30v !!
    i dont know how!!!!
    plz

  • Seriously don’t buy this junk mod. I’ve been back and forth with Wismec for 3 months now (warranty is now up) and they’re not doing anything for me. Before you decide to read further, know that I’m not alone in this– it’s all over forum’s.
    The 510 pin is garbage and WILL DEFINITELY screw up on you eventually, it’s just a matter of time. First, it’ll misread resistance. A few pulses, some cooling, unscrewing the tank and firing, etc— you might be able to get it to ask you if it’s a new coil. Hopefully the coil hasn’t become heated enough from pulsing to read improperly. The mod absolutely refuses to let you stay in TC mode unless you pulse it a few times before drawing. Otherwise, you’ll be kicked out of whatever setting you have it to and defaulted to 20 watts VW mode. Sometimes it won’t read atomizers at all and insists that all atty’s are damaged. This will go on for about half a day until it magically decides to work again. It’s not my coils, it’s not my atty’s– none of my other mods are having these types of problems. It’s definitely this piece of junk. I’m not alone either. A quick google search for Wismec RX TC issues SS316 will bring up a lengthy list. Want to see even more problems? Google “Wismec faulty 510 pin”
    These problems apply to the RX 2/3, RX200 and Reuleaux DNA. I unfortunately am the owner of the RX2/3.
    Wismec still refuses to acknowledge any of these issues and yet they brag about their new RX200S having an “improved 510 pin”
    Thanks guys, way to screw over your current customers. Despite this, I’m still hearing issues about the 200s as well.
    Wismec’s support is the absolute worst. They will blame the problems of the mod on user error (If you knew me and my little vape hobby, you’d laugh at that statement) and when you email them again less than a week later, they act like it’s your first time addressing the issue and will throw out another cookie-cutter response, often referencing you to a page in the e-manual.
    STAY AWAY FROM WISMEC!!

    • Yeah-I am now on my 3rd one of these in 3 weeks.. The first stopped recognising any atty’s. Shop replaced it for me. Second one just ..died one day later. Brought it back again-gave me another one. Third one-the screen died after less than a week..Mod still fires-but without a screen it’s not much use. I always use separate battery charger, I am using new batteries, no liquid leaks, no dropping it, i have been SO careful -these things are as fragile as an eggshell.

      Totally useless. A shame because I actually really like it when it works-it looks great, feels good, stays charged a long time..

  • I have a wismec reuleaux rx2/3 after the first two weeks I was having problems with it. The mod kept telling me to check battery. I had it warranty out since it was still new. Now I’m having another problem. The screen is all black and will not light up. I thought it was in stealth mode, so I tried to turn off stealth mode and no luck screen is still black. The device still allows me to vape but I cannot see the screen. Which I cannot see to know when my batteries are dying or what wattage I’m using. I even took it to my local vape shop to have them look at it and they even tried to take it out of stealth mode which is not the problem. Two of the exact same mods in three months C’mon give me a break.

    • Yes, the best thing to do is immediately turn the power off, remove the batteries, and then place in a container of rice for a day or 2. I know this post it 4 days too late so that advice no longer applies. By now all the water would be evaporated, and the damage will have been done. the extent of the damage all depends on how long it was in the water and if the devices’ power was on when it went for a swim. If there was water on the circuit board while power was circulating through the board, the water would cause shorts between the pins of IC’s and micro-processors etc, causing permanent damage. So in other words, you’re screwed, unless by some miracle you got lucky and didn’t fry the board.

  • There is an error on page 4. The ” Locking in the resistance section “, no longer works. I just installed the latest firmware upgrade, version 4.13. Long holding the fire and up button activates the new preheat function. I’m not sure if they deleted the ability to lock in the resistance or changed the procedure to activate it.

  • Wow…I read all these negative comments on this device, now I am getting scared to use mine any more. I have RX 2/3 and have no problems with it, I use it in temp mode SS and power mode but mostly temp mode and never had a problem with it, I only use the three battery option and use it everyday all day. It is about 4 months old now, man I hope it keeps going, its a very nice mod!

    • Keep vaping as you were and enjoying your device. You got an awesome mod for a low price. If it goes out at any point, just know that you vaped it to the fullest and got the best satisfaction for the time it functioned correctly. I wouldn’t read too much into some of these comments. Understand that the thousands and thousands of people that own this specific device aren’t commenting just to say “hey mine works great”.

      • Had mine one week and the screen is black! Can’t afford to enjoy a 50$/week mod and that’s not counting batteries and juice. I use a viva nova on 7watts! I don’t think I was abusing it! Now since I can’t afford 50$/week for a new mod, I get to take it apart and solder this junk back together! If you can’t solder, don’t buy a wismec! Can’t believe you told people to ignore comments! Guess your out for what you can get from wismec and not your readers! Doubt you’ll respond
        Sincerely, Preston Caldwell

        • Actually, I don’t remind responding at all. I’ve used my RX2/3 for the longest, and then when I was done with it my wife started using it. She still uses it to this day with no problems at all – not a single one. As for your screen going black, I’m sorry you’re having issues, but just because you are a few other people have issues, that doesn’t mean you can label the brand and the products it puts out as bad or low quality. As a reviewer, I’ve had plenty of Wismec product and I’ve never had an issue. It’s unfortunate that you are having trouble with yours, however. Do not solder anything nor take it apart. If you’ve only had the device for a week, I’m sure you can contact the store you purchased it from or Wismec support to replace the unit.

  • 5 days ago i bought a reuleaux rx 2/3 and in the past i used kanthal builds. Now i use ss 316. I am trying to understand tcr and tc mode for ss but i find it difficult to understand. I need guidance.If anyone can help out it would be much appreciated.
    So let me give you my details.
    I have a griffin 22rta dual coil build, 3mm inner diam, ss316 9 wraps each coil, 26g spaced. my total res comes down to 0.31ohm.
    i got no problems vaping at vw but i want to try tc mode ss and tcr.
    i put all the above info at steam engine and i get this…TCR in vaping range 880 ×10-6 at the results on the bottom left blue window, so i go to tcrm1 and i put instead of 80(default value) 88 and i always get temp correction from 100 celsius to 300. I usually vape at 35w to 55w.
    No matter how i readjust the temperature in the main screen (starting from 100 degrees all the way upto 300) when in tcr m1 mode at 88 value i get temp correction and no vape.
    Then i thought since the coils are 2 maybe i should increase the tcr M1 value to 88 X 2 = 176 which i did. By doing that it seems to be vaping ok and now i vape at tcr M1 176 value with temp at 175 ~190 celsius at 35 ~55w depending on how i want my vape warm …thick…
    It seems to work.
    Is this the proper way of thinking and working with tc mode and tcr?
    Please someone to explain?i m so confused on whether i am using the correct tcr value from steam engine as well as the rest parameters such as wattage, main screen temperature etc…
    Could someone shed some light?
    i am trying to find clues and answers at utube and elsewhere and i cannot understand this thing.

  • hello everyone
    I have a problem and i was hoping if anyone can help me on this.

    i have the Reuleaux RX2/3 a brand new one actually because i broke the last one, and i have an ASPIRE CLIETO and one i install it, the device simply wont recognize it, and when i press the fire button, the device will give me an error ‘ NO ATOMIZER FOUND ‘

    What can i do to solve the problem ?? please help, i cant believe i broke another brand new device…

  • 5 wrap 3m alien dual coils on Apocalypse RDA V2. Jaybo is loaded with 2 3000 m batteries. Problem with slow slow ramp up time. WTH?? Help

    • Need an extremely durable unit, looking for great vape and clouds and good battery life when in remote areas. Charging avail w/usb, battery charger and wall charger?

      • Then this is a solid device for you. It offers the ability to use 2 or 3 batteries (great battery life), it has great quality, especially for the price, it offers a consistent draw, and it comes with a micro-USB cable so charging the batteries in the device is an option. There is no wall charger… you’ll need to use your own wall charger.

    • I don’t sell the Reuleaux RX2/3, I just guide you to a website that I recommend to purchase it from. You can click on the buttons to visit the site to purchase it. If there’s anything I can help you with, just ask and I’ll respond.

  • I found that if you press and hold the fire and up buttons at the same time you’ll get a Logo and Preheat options (when in VW)

  • Having a similar issue to which I seen the post initially. I thought it was in stealth mode but it will not turn on nor will it reset. I was hoping that after taking out the batteries it would reset. I’m having some difficulties with this mod and already have had it replaced once after 3 days of purchase. Hoping I didn’t waste $200 on the setup period I would really appreciate your help thank you

    • I hope you didn’t spend $200 on it… anyways, make sure it isn’t your batteries, and if not it’s probably dead. Take it back to the store you got it from to see if they can replace it.

      • Thank you for the reply. What happened was it was a kiosk in a mall and I got the super beast tank along with a few juices. The only issue is I got it in San Antonio I’m currently in Birmingham Alabama. I may just act as though I purchased it from a different dealer. They usually don’t know the difference when they’re at a kiosk. Thanks again

  • How is this for you. I just picked up a second 2/3 because the first one’s screen decided to die on me after 4 months. I literally take ithe new one out of the box, toss in some batteries and update the firmware. Upon completion the mod starts to smoke from both vent holes. I grab it to toss it outside just in case the batteries vent, it won’t be in the house. As I pop the usb cord out of the device my computer makes a popping sound and smoke starts coming out of it. I get the mod outside and pull the batteries out. No venting, no nothing. Basically the mod shorted then shorted my computer. I can’t wait to see how they try to dodge this…

  • Why my rx2/3 connot reach a wattage 150 only 97.3 and connot go up. I use 2 batt with 3500mah.i update firmware but steel 97.3w.what is the problem on my rx2/3?coul any one help?thnx and god bless us all

Seduce Juice
Highbrow Vapor
Smoque
Vapor Authority

Newsletter

Subscribe to the Guide To Vaping Newsletter for the latest vaping news, reviews, and information. Be the first to receive our exclusive deals and giveaways!

VaporFi Free E-Liquid

VaporFi Free E-Liquid