If you’re on the hunt for a solid vape pod system or just need some guidance on one of Aspire’s best devices yet, we’ve written a complete guide to the Aspire Breeze 2. The guide is ultimately a user manual or instruction manual to educate you on the make-up of the device and inform you on how to use it. We’ll start by telling you more about the Aspire Breeze 2 Vape Pod System, then we’ll go over the basic operation, along with a few tips so that you’ll know all about this remarkable vaporizer and how to use it.
About The Aspire Breeze 2
The Aspire Breeze 2 is an outstanding vapor pod system that was designed and manufactured by one of the industry’s most iconic brands. Aspire is known for its innovations, and the Aspire Breeze 2 is a clear example. The looks are incredible, especially when you begin to explore the variety of finish options. When it comes down to it, the Aspire Breeze 2 is an upgraded version of the original Aspire Breeze, featuring the same all-in-one pod design, and remaining compact and very portable. Despite its small size, the Aspire Breeze 2, the second in the Breeze family, packs in a larger 1000mAh rechargeable battery that comes integrated into the device. While the battery may deliver the power, you’re the one that controls it by using the single button-operation, which takes advantage of its direct voltage output, where the power output is based on the current state of the battery. All of this comes together with its durable aluminum body structure.
The pod itself is constructed of a PEPG material and features a 3ML e-liquid capacity, which can be top-filled. A plastic cap comes included that covers the drip tip (mouthpiece), but that isn’t why the Breeze 2 is so impressive. In fact, it’s the Breeze U-Tech Coil Technology that makes the Aspire Breeze 2 shine above its competitors. It has a U-shaped cylinder structure and the coil options include the 0.6-ohm Breeze U-Tech Coil and the 1.0-ohm Breeze U-Tech Coil that’s designed for nicotine salt e-liquids. Additional features include adjustable airflow control and bypass output so that you can vape while charging.
The Aspire Breeze 2 AIO Kit comes with an assortment of accessories to fill out the entire kit upon purchase. Not only will you receive the Aspire Breeze 2 device itself, but you’ll also receive 2 coils (one 1.0-ohm and one 0.6-ohm), 4 extra o-rings, one silicone seal, a micro-USB cable, a warranty card, and a user manual.
How To Turn The Breeze 2 ON or OFF: Simply press the fire button five times within two seconds and the device will turn on. Repeat the process and the device will turn off. There is an indicator light that is positioned towards the bottom of the pod system. That indicator light will flash blue and orange three times to indicate when the device is turned on or off.
How To Check The Battery Level (Current Charge): While the Aspire Breeze 2 is on, simply press the fire button and the LED indicator light will indicate the battery life or current charge. At a full charge or above 3.8V the light will be blue and orange. When it’s between 3.8V and 3.5V, then the light will be blue only. When the current charge drops below 3.5V the light will be orange, indicating that the device needs to be charged.
How To Charge The Aspire Breeze 2: With the Aspire Breeze 2, there is an integrated 1000mAh rechargeable battery. This battery can be charged via the micro-USB port, and its maximum charge current can reach upwards of 800mAh. To begin charging, attach the USB cable to a USB outlet and the micro-USB end to the micro-USB port on the device. When the cable is attached properly, the Breeze 2 indicator light will flash blue and orange three times to indicate the charging process is happening. During the charging process, the LED light will also indicate the current charge status. 3.5V or less will display an orange light, 3.5V to 3.8V will display a blue light, and 3.8V and above will display both a blue and orange light. When the Aspire Breeze 2 is fully charged the light will flash blue and orange 20 times then automatically turn off.
How To Install The Breeze 2 Coil: Begin by pulling and removing the drip tip section, then unscrew and pull out the chimney unit. Next, you’ll want to detach the coil from the airflow control ring and replace it with a new coil. Simply screw the chimney unit back onto the pod system and replace the drip tip section.
How To Fill The Breeze 2 With E-Liquid: To begin, you’ll want to remove the pod from the device. To do this, simply squeeze the pod release buttons on each side of the device. Next, invert the pod and lift the silicone seal, then pour e-liquid into the filling hole. Once filled, replace the silicone seal back into place and reinsert the pod back into the device by pushing down firmly until it clicks into place.