Wismec Predator 228 Advanced Operation
This part of the guide is where we knuckle down and get into the supplementary functions of Temperature Control and figuring out the Temperature Coefficient of Resistance parameters. It may sound complicated, but it’s actually simple to do. We hope this answers some of your more advanced questions about the Predator 228 Mod.
Shifting from °C to °F: The unit of measure automatically changes between Fahrenheit and centigrade if you max out the bar. Pushing through 315°C will change it over to Fahrenheit — it is that simple.
Temperature Adjustment: When you are in any of the TC modes, hitting the adjustment buttons will move the temperature up/down – right to increase, left to decrease.
TCR Mode: Power off the device, then press the fire button and right adjustment button simultaneously until the device jumps into TCR mode.
Press the left/right buttons to switch between TCR M1, M2, and M3. Hit the Fire button to confirm the mode. Use The Left/Right button to insert parameters of coils.
Material
- Nickel
- NiFe
- Titanium
- SS (304,316,317)
TCR Value Range
- 600-700
- 300-400
- 300-400
- 80-200
You forgot one.
To reset the puff counter on the Wismec Predator
1) Press the fire button 3 times
2) Press the left adjustment button to select the puff counter “P”
3) When the puff sign blink, keep pressing the fire button and then you can reset the puffs to zero
I also came here looking to reset my puff counter.
Thanks to Paul, I was able to do just that. =)
Did what you said but it didn’t reset my puff count
Longpress the fire button once puff/sec display is highlighted is actually how to reset It.
The exact thing I was looking for.
Had this for a week and for some reason my side button stopped working and the adjustment buttons on the front make the mod fire without stopping. Returning this for a new one. Nothing I have done will make this work again
Did you figure it out? Mines doing the same thing.
Ejuice must have got into the 510 connector somehow, either thru ur tank connector pin or something, I normally check from timeto time if my 510 is dry.
My Predator’s display just ceased working this weekend. Last Saturday it would still show the command confirmation like Stealth On/Off or Key Locked/ Unlocked. It just wouldn’t show anything on display. It still fires my RDTA so it’s not totally broken. I may need to return this to the reseller where I got it from…
I have never seen my Predator ask me if my coil is new.
How do I reset my puff count I recently just got my predator thanks in advance
Can someone please tell me how to get the key lock off. For some reason on both my units it’s on key lock and I can’t change the watts. I have tried everything they say to do.
Long press both the center button and it will toggle the key lock
Had my Predator 228 for a few months before things started getting weird. I usually use it in TC mode and the resistance calculation would start resetting and asking if I was using a new coil or the old one. Then when pressing the button, the heat would bounce up and down before outputting almost 0W while saying the temp was at the preset limit, even though it was cool. I dismantled it and cleaned everything, which seemed to fix it for a few weeks, now the 510 connector is loose and the TC mode is almost unusable. I love the design but this is a very poorly made mod. Stay clear of it, I won’t be replacing it with another.
And also, it randomly switches into Wattage mode and has to have the atty removed to set it back to TC mode. Finally it will now often report atty short, but when I put the atty onto another mod it fires fine.
That’s a sure problem the 510 is starting to come loose. I’ve had 2 and while neither has came out I get short issues all the time. Sometimes taking the tank off or batteries out and resetting the board helps but just temporarily, I’d suggest taking it apart and soldering 510 to the case but make sure to sand flush so everything will fit back but if your not comfortable with solder I’d recommend a new mod.
got to say i have had no problems until recently, it says attomiser short, i have to take the batteries out and back in and it works again, is it on the way out and do i need to replace the unit or is it a simple fix?
i have cleaned the unit so no juice on it, its been well looked after so not sure why, i have used several tanks on it and they are fine but 1 tank will not work on it?/ any advice would be greatly appreciated tia……..
I’m having the same issue as scott carrington.
The display on mine has flipped upside down. How can the be fixed