Wismec moves forward from its flagship Reuleaux Series to unveil the all new Wismec Predator 228 Mod, a device that’s geared to attract a new audience to the already popular brand. Over the last couple of years Wismec’s Reuleaux RX200, RX200S, RX2/3, and RX300 have received loads of attention, but this new Predator 228 Box Mod could very well surpass the success of them all. It’s been gifted with a modern design, a small footprint, high appeal, remarkable features, and solid performance. Stick around as we tell you all about Wismec’s new banger in this Wismec Predator 228 Mod Preview!
[mks_button size=”medium” title=”GET THE WISMEC PREDATOR 228 MOD HERE” style=”squared” url=”http://bit.ly/2nbP2M5″ target=”_blank” bg_color=”#000000″ txt_color=”#FFFFFF” icon=”” icon_type=”” nofollow=”1″]
[mks_separator style=”dotted” height=”1″]
Wismec Predator 228 Mod Includes: When buying the Predator 228 Mod you will receive the Predator 228 Box Mod itself without a tank. However, other kits will allow you buy the device in a starter kit combo. Along with the device you’ll also receive a micro-USB cable, and a thorough instruction manual that covers the basic operations of the Predator 228.
Wismec Predator 228 Mod Features and Specs
The all new Predator 228 Mod by Wismec stands just 86.7mm by 43.6mm by 29mm, features a modern design, and an ergonomic contour that you’ll immediately fall in love with. Though not very similar, the Predator 228 reminds you of high-end vape mods like the YiHi SX Mini Q-Class — a sense that I can’t quite explain. However, though not on the same level, the Predator 228 does indeed offer the latest vaping has to offer, such as 228 watts of vaping power, a 0.05Ω minimum resistance, a full temperature control suite that supports Ni200, Titanium, and 316 Stainless Steel, as well as TCR adjustments.
Furthermore, you’ll be pleased with its stealth firing far that allows you to squeeze-to-fire, an intuitive OLED display that looks much different than past Wismec offerings, a slide-to-open hinged battery door that holds two 18650 batteries that are of course sold separately, and a stainless steel 510 connection that has a spring-loaded pin. In addition, the Wismec Predator 228 Mod also comes equipped with a new balance charge technology, an innovative buck-boost technology, dual circuit protection, reverse polarity protection, optional power bank capability, and a micro-USB port that’s used for both charging and future firmware upgrades. It’s an incredible, new, and unique release from Wismec that’s sure to become a hit.
Just got one and stopped working after a couple days, no response from the company on what could be the problem but not impressed with there customer service and my device is dead, getting replacement from vape store but wow really!!
charged batteries off board and nothing is wrong with batteries because they work in my 213
Mine lastet 3 1/2 weeks and went haywire. The 510 connector popped out then the display went to a rectangular box of snow. Replaced by vendor Thank God. Wismec has changed sine Jaybo left, and not for the better.
I have had my Predator for a little over a month and havent had any issues at all. I must admit this is my first purchase of a vaping device and my inexperience has left me quite frustrated in regards to trying to use the TC mode. I have read that tiny writing in the manual and watched enough YouTube to cause blindness however Im just not “getting” it. I would greatly appreciate any help, guidance, direction, sympathy 🙂
To use the TC Mode you need to ensure you’re using the correct coil head. There are a few different supported coils, such as stainless steel, ni200 nickel, and titanium. Once you have your coil head installed and primed correctly, you can then navigate to the TC Mode and adjust to the correct wire/coil you’re using. For an example, if you’re using a Stainless Steel Coil Head, you’ll want to go to TC-SS. I believe in this video I show how to switch to TC. Without looking, I think it’s like 3 clicks, right adjustment button to go to tc, then left adjustment button to change wire type being used, then right adjustment to cycle through. You can hit left adjustment button from there to go down and adjust other settings.